regmap: regmap-irq/gpio-max77620: add level-irq support
Add level active IRQ support to regmap-irq irqchip. Change breaks
existing regmap-irq type setting. Convert the existing drivers which
use regmap-irq with trigger type setting (gpio-max77620) to work
with this new approach. So we do not magically support level-active
IRQs on gpio-max77620 - but add support to the regmap-irq for chips
which support them =)
We do not support distinguishing situation where HW supports rising
and falling edge detection but not both. Separating this would require
inventing yet another flags for IRQ types.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index c54c778..0f1832e 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1089,22 +1089,37 @@ int regmap_fields_read(struct regmap_field *field, unsigned int id,
int regmap_fields_update_bits_base(struct regmap_field *field, unsigned int id,
unsigned int mask, unsigned int val,
bool *change, bool async, bool force);
+/**
+ * struct regmap_irq_type - IRQ type definitions.
+ *
+ * @type_reg_offset: Offset register for the irq type setting.
+ * @type_rising_val: Register value to configure RISING type irq.
+ * @type_falling_val: Register value to configure FALLING type irq.
+ * @type_level_low_val: Register value to configure LEVEL_LOW type irq.
+ * @type_level_high_val: Register value to configure LEVEL_HIGH type irq.
+ * @types_supported: logical OR of IRQ_TYPE_* flags indicating supported types.
+ */
+struct regmap_irq_type {
+ unsigned int type_reg_offset;
+ unsigned int type_reg_mask;
+ unsigned int type_rising_val;
+ unsigned int type_falling_val;
+ unsigned int type_level_low_val;
+ unsigned int type_level_high_val;
+ unsigned int types_supported;
+};
/**
* struct regmap_irq - Description of an IRQ for the generic regmap irq_chip.
*
* @reg_offset: Offset of the status/mask register within the bank
* @mask: Mask used to flag/control the register.
- * @type_reg_offset: Offset register for the irq type setting.
- * @type_rising_mask: Mask bit to configure RISING type irq.
- * @type_falling_mask: Mask bit to configure FALLING type irq.
+ * @type: IRQ trigger type setting details if supported.
*/
struct regmap_irq {
unsigned int reg_offset;
unsigned int mask;
- unsigned int type_reg_offset;
- unsigned int type_rising_mask;
- unsigned int type_falling_mask;
+ struct regmap_irq_type type;
};
#define REGMAP_IRQ_REG(_irq, _off, _mask) \