ASoC: rt5651: Allow specifying over-current threshold through a device-property
OVer-Current-Detection (OVCD) for the micbias current is used to detect
if an inserted jack is a headset or headphones (mic shorted to ground).
Some boards may need different values for the OVCD current threshold
because of a resistor on the board in serial with or parallel to the
jack mic contact.
This commit adds support for configuring the OCVD current threshold
through the "realtek,over-current-threshold-microamp" device-property.
Note this commit changes the default value from 600uA to 2000uA,
because testing has shown 600uA to be a poor default.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
diff --git a/sound/soc/codecs/rt5651.h b/sound/soc/codecs/rt5651.h
index f315848..9cd5c27 100644
--- a/sound/soc/codecs/rt5651.h
+++ b/sound/soc/codecs/rt5651.h
@@ -2064,6 +2064,7 @@ struct rt5651_priv {
struct snd_soc_jack *hp_jack;
struct delayed_work jack_detect_work;
enum rt5651_jd_src jd_src;
+ unsigned int ovcd_th;
int irq;
int sysclk;