mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops
->setup_data_interface() is a controller specific method and should
thus be placed in nand_controller_ops.
In order to make that work with controllers that support keeping
pre-configured timings we need to add a new NAND_KEEP_TIMINGS flag to
inform the core it should skip the timings selection step.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Tested-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index ce124f8..b6b4602 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1288,6 +1288,7 @@ static int mtk_nfc_attach_chip(struct nand_chip *chip)
static const struct nand_controller_ops mtk_nfc_controller_ops = {
.attach_chip = mtk_nfc_attach_chip,
+ .setup_data_interface = mtk_nfc_setup_data_interface,
};
static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
@@ -1339,7 +1340,6 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
nand->legacy.read_byte = mtk_nfc_read_byte;
nand->legacy.read_buf = mtk_nfc_read_buf;
nand->legacy.cmd_ctrl = mtk_nfc_cmd_ctrl;
- nand->setup_data_interface = mtk_nfc_setup_data_interface;
/* set default mode in case dt entry is missing */
nand->ecc.mode = NAND_ECC_HW;