Git Browser for ODROID
Code Review Sign In
git.odroid.com / yocto / kernel / common / d94e16579b8bdab145ea9f655c60b83ee0b2edee
commitd94e16579b8bdab145ea9f655c60b83ee0b2edee[log] [tgz]
authorYifan Hong <elsk@google.com>Wed May 29 16:52:55 2024 +0000
committerTreehugger Robot <android-test-infra-autosubmit@system.gserviceaccount.com>Thu May 30 20:23:21 2024 +0000
tree3e7b53c60f04664f57100ba31bfcb104f3566df9
parent81d41dd61b6aee07d5a5a547850cca62016e370a [diff]
Revert^2 "BACKPORT: FROMGIT: module: allow UNUSED_KSYMS_WHITELIST ..."

This reverts commit b7d4cf60e79d04bce1ba0870d173d53400b5d2bb.

Reason for revert: relanding change that should be safe to go in on its own. Below is the original commit message.

BACKPORT: FROMGIT: module: allow UNUSED_KSYMS_WHITELIST to be relative against objtree.

If UNUSED_KSYMS_WHITELIST is a file generated
before Kbuild runs, and the source tree is in
a read-only filesystem, the developer must put
the file somewhere and specify an absolute
path to UNUSED_KSYMS_WHITELIST. This worked,
but if IKCONFIG=y, an absolute path is embedded
into .config and eventually into vmlinux, causing
the build to be less reproducible when building
on a different machine.

This patch makes the handling of
UNUSED_KSYMS_WHITELIST to be similar to
MODULE_SIG_KEY.

First, check if UNUSED_KSYMS_WHITELIST is an
absolute path, just as before this patch. If so,
use the path as is.

If it is a relative path, use wildcard to check
the existence of the file below objtree first.
If it does not exist, fall back to the original
behavior of adding $(srctree)/ before the value.

After this patch, the developer can put the generated
file in objtree, then use a relative path against
objtree in .config, eradicating any absolute paths
that may be evaluated differently on different machines.

Signed-off-by: Yifan Hong <elsk@google.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

(cherry picked from commit a2e3c811938b4902725e259c03b2d6c539613992
 https://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux.git modules-next)
Bug: 333769605

Change-Id: Ibf3f09dc8559e92023811abaabb33fd6b4ed8fa5
[elsk: apply change to gen_autoksyms.sh instead because
 CONFIG_UNUSED_KSYMS_WHITELIST is parsed there. Revert change
 to Makefile.modpost.]
Bug: 342390208
Signed-off-by: Yifan Hong <elsk@google.com>
2 files changed
tree: 3e7b53c60f04664f57100ba31bfcb104f3566df9
  1. android/
  2. arch/
  3. block/
  4. certs/
  5. crypto/
  6. Documentation/
  7. drivers/
  8. fs/
  9. include/
  10. init/
  11. io_uring/
  12. ipc/
  13. kernel/
  14. lib/
  15. LICENSES/
  16. mm/
  17. net/
  18. samples/
  19. scripts/
  20. security/
  21. sound/
  22. tools/
  23. usr/
  24. virt/
  25. .clang-format
  26. .cocciconfig
  27. .get_maintainer.ignore
  28. .gitattributes
  29. .gitignore
  30. .mailmap
  31. BUILD.bazel
  32. build.config.aarch64
  33. build.config.allmodconfig
  34. build.config.allmodconfig.aarch64
  35. build.config.allmodconfig.arm
  36. build.config.allmodconfig.x86_64
  37. build.config.amlogic
  38. build.config.arm
  39. build.config.common
  40. build.config.constants
  41. build.config.db845c
  42. build.config.gki
  43. build.config.gki-debug.aarch64
  44. build.config.gki-debug.x86_64
  45. build.config.gki.aarch64
  46. build.config.gki.aarch64.fips140
  47. build.config.gki.x86_64
  48. build.config.gki_kasan
  49. build.config.gki_kasan.aarch64
  50. build.config.gki_kasan.x86_64
  51. build.config.gki_kprobes
  52. build.config.gki_kprobes.aarch64
  53. build.config.gki_kprobes.x86_64
  54. build.config.khwasan
  55. build.config.rockpi4
  56. build.config.x86_64
  57. COPYING
  58. CREDITS
  59. Kbuild
  60. Kconfig
  61. Kconfig.ext
  62. MAINTAINERS
  63. Makefile
  64. modules.bzl
  65. OWNERS
  66. README
  67. README.md
README.md

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.

  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass scripts/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)