scripts: add package sh [1/1]
PD#SWPL-67525
Problem:
add package sh
Solution:
add package sh
Verify:
ad401_a113l
Signed-off-by: shijie.xiong <shijie.xiong@amlogic.com>
Change-Id: I17c88f80c30c826da21f99abd30e5380c3f03164
diff --git a/package.sh b/package.sh
new file mode 100755
index 0000000..ddad340
--- /dev/null
+++ b/package.sh
@@ -0,0 +1,189 @@
+#! /bin/bash
+#
+# Copyright (c) 2021-2022 Amlogic, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: MIT
+#
+
+RTOS_BUILD_DIR=$(realpath $(dirname $(readlink -f ${BASH_SOURCE[0]:-$0}))/..)
+BOARD_ARRY=(ad401_a113l ad403_a113l)
+BOARD_LIST_ARRY=($(find ${RTOS_BUILD_DIR}/boards -mindepth 2 -maxdepth 2 -type d ! -name ".*" | xargs basename -a | sort -n))
+
+#Equipment validity check
+function board_validity_check() {
+ #parameter check
+ if [ -z "$1" ]; then
+ echo -e "\033[41;33m COMPILER is not set, Please execute source scripts/env.sh \033[0m"
+ exit 0
+ fi
+ #Determine whether this board is supported
+ for boards in ${BOARD_ARRY[@]}; do
+ if [ "$boards" == "$1" ] || [[ "$1" =~ $boards"_hifi" ]]; then
+ BUILD_RTOS=1
+ fi
+ done
+ if [ -z "$BUILD_RTOS" ]; then
+ echo -e "\033[41;33m WARNING: $1 boards do not support packaging!!!\033[0m"
+ exit 0
+ fi
+ #Identify and determine the corresponding board combination
+ for boards in ${BOARD_LIST_ARRY[@]}; do
+ if [ $boards == $1 ] && [[ "$1" =~ "_hifi" ]]; then
+ BOARD_NAME=${1%_hifi*}
+ DSP_BOARD_NAME=$1
+ BUILD_DSP=1
+ elif [ $boards == $1 ]; then
+ BOARD_NAME=$1
+ for dsp in ${BOARD_LIST_ARRY[@]}; do
+ if [[ "$dsp" =~ $BOARD_NAME"_hifi" ]]; then
+ DSP_BOARD_NAME=$dsp
+ BUILD_DSP=1
+ fi
+ done
+ fi
+ done
+ #Set up the build project
+ BUILD_CLEAN=1
+ BUILD_IMAGE=1
+ BUILD_UBOOT=1
+ #Set the board configuration path
+ IMAGE_BOARD_CONFIG_DIR="image_packer/$SOC/"
+}
+
+#select build board
+function build_board_select() {
+
+ #Determine dsp and arm types
+ case ${SOC} in
+ 'a1')
+ RTOS_BOARD_ARCH="arm64"
+ DSP_BOARD_ARCH="xtensa"
+ RTOS_BOARD_PRODUCT="speaker"
+ DSP_BOARD_PRODUCT="hifi_dsp"
+ ;;
+ *)
+ echo "Unsupported soc type:${SOC}"
+ exit 0
+ ;;
+ esac
+
+ #Determine the hardware model, boot type
+ case $1 in
+ 'ad401_a113l')
+ UBOOT_BOARDNAME="a1_ad401_nand_rtos"
+ ;;
+ 'ad403_a113l')
+ UBOOT_BOARDNAME="a1_ad403_nor_rtos"
+ unset BUILD_DSP
+ unset DSP_BOARD_ARCH
+ ;;
+ *)
+ echo "Unsupported board type:$1"
+ exit 0
+ ;;
+ esac
+
+ #Arch prefix settings
+ if [ -n "$RTOS_BOARD_ARCH" ]; then
+ ARCH_PREFIX="${RTOS_BOARD_ARCH}""-"
+ fi
+ if [ -n "$DSP_BOARD_ARCH" ]; then
+ ARCH_PREFIX="${ARCH_PREFIX}""${DSP_BOARD_ARCH}""-"
+ fi
+}
+
+#build rtos dsp
+function build_rtos_dsp() {
+
+ pushd $RTOS_BUILD_DIR
+
+ source scripts/env.sh ${DSP_BOARD_ARCH} ${SOC} ${DSP_BOARD_NAME} ${DSP_BOARD_PRODUCT}
+
+ make
+
+ test -f ${DSP_SDK_SINGED_BIN_FILE} && cp ${DSP_SDK_SINGED_BIN_FILE} $PROJECT_BUILD_OUT_IMAGE_PATH/dspboot.bin
+ rm -rf $DSP_SDK_OUT_PATH
+
+ popd
+}
+
+#build rtos uimage
+function build_rtos_image() {
+
+ pushd $RTOS_BUILD_DIR
+
+ source scripts/env.sh ${RTOS_BOARD_ARCH} ${SOC} ${BOARD_NAME} ${RTOS_BOARD_PRODUCT}
+
+ if [ -n "$1" ] &&
+ [ $1 == "backtrace" ]; then
+ make backtrace
+ else
+ make
+ fi
+
+ if [ $? -ne 0 ]; then
+ echo "bulid rtos image faile error:$?"
+ popd
+ exit 1
+ else
+ mkimage -A ${ARCH} -O u-boot -T standalone -C none -a 0x1000 -e 0x1000 -n rtos -d ${RTOS_SDK_SINGED_BIN_FILE} ${RTOS_SDK_IMAGE_PATH}/rtos-uImage
+ test -f ${RTOS_SDK_IMAGE_PATH}/rtos-uImage && cp ${RTOS_SDK_IMAGE_PATH}/rtos-uImage $PROJECT_BUILD_OUT_IMAGE_PATH/rtos-uImage
+ rm -rf $RTOS_SDK_OUT_PATH
+ fi
+
+ popd
+}
+
+#build aml image
+function build_aml_image() {
+ install $RTOS_BUILD_DIR/$IMAGE_BOARD_CONFIG_DIR/platform.conf $PROJECT_BUILD_OUT_IMAGE_PATH/
+ install $RTOS_BUILD_DIR/$IMAGE_BOARD_CONFIG_DIR/usb_flow.aml $PROJECT_BUILD_OUT_IMAGE_PATH/
+ install $RTOS_BUILD_DIR/$IMAGE_BOARD_CONFIG_DIR/aml_sdc_burn.ini $PROJECT_BUILD_OUT_IMAGE_PATH/
+ if [ -z "$BUILD_DSP" ]; then
+ install $RTOS_BUILD_DIR/$IMAGE_BOARD_CONFIG_DIR/aml_upgrade_package_ndsp.conf $PROJECT_BUILD_OUT_IMAGE_PATH/
+ $RTOS_BUILD_DIR/image_packer/aml_image_v2_packer -r $PROJECT_BUILD_OUT_IMAGE_PATH/aml_upgrade_package_ndsp.conf $PROJECT_BUILD_OUT_IMAGE_PATH $PROJECT_BUILD_OUT_IMAGE_PATH/aml_upgrade_package.img
+ else
+ install $RTOS_BUILD_DIR/$IMAGE_BOARD_CONFIG_DIR/aml_upgrade_package.conf $PROJECT_BUILD_OUT_IMAGE_PATH/
+ $RTOS_BUILD_DIR/image_packer/aml_image_v2_packer -r $PROJECT_BUILD_OUT_IMAGE_PATH/aml_upgrade_package.conf $PROJECT_BUILD_OUT_IMAGE_PATH $PROJECT_BUILD_OUT_IMAGE_PATH/aml_upgrade_package.img
+ fi
+}
+
+#build uboot
+function build_uboot() {
+ if [ $UBOOT_BOARDNAME == "none" ]; then
+ echo "Select board($BOARD) not support compile uboot"
+ exit 1
+ else
+ pushd $RTOS_BUILD_DIR/boot/
+ ./mk $1
+ test -f build/u-boot.bin && cp -av build/u-boot.bin* $PROJECT_BUILD_OUT_IMAGE_PATH
+ popd
+ fi
+}
+
+board_validity_check $BOARD
+build_board_select $BOARD_NAME
+
+export PROJECT_BUILD_OUT_IMAGE_PATH=${RTOS_BUILD_DIR}/output/package/"${ARCH_PREFIX}""${SOC}"-${BOARD_NAME}/images/
+
+export RTOS_SDK_OUT_PATH=${RTOS_BUILD_DIR}/output/${RTOS_BOARD_ARCH}-${BOARD_NAME}-${RTOS_BOARD_PRODUCT}
+export RTOS_SDK_IMAGE_PATH=${RTOS_BUILD_DIR}/output/${RTOS_BOARD_ARCH}-${BOARD_NAME}-${RTOS_BOARD_PRODUCT}/images
+export RTOS_SDK_SINGED_BIN_FILE=${RTOS_BUILD_DIR}/output/${RTOS_BOARD_ARCH}-${BOARD_NAME}-${RTOS_BOARD_PRODUCT}/images/${KERNEL}-signed.bin
+
+export DSP_SDK_OUT_PATH=${RTOS_BUILD_DIR}/output/${DSP_BOARD_ARCH}-${DSP_BOARD_NAME}-${DSP_BOARD_PRODUCT}
+export DSP_SDK_IMAGE_PATH=${RTOS_BUILD_DIR}/output/${DSP_BOARD_ARCH}-${DSP_BOARD_NAME}-${DSP_BOARD_PRODUCT}/images
+export DSP_SDK_SINGED_BIN_FILE=${RTOS_BUILD_DIR}/output/${DSP_BOARD_ARCH}-${DSP_BOARD_NAME}-${DSP_BOARD_PRODUCT}/images/${KERNEL}-signed.bin
+
+test -n "$BUILD_CLEAN" && rm -fr $DSP_SDK_OUT_PATH
+test -n "$BUILD_CLEAN" && rm -fr $RTOS_SDK_OUT_PATH
+test -n "$BUILD_CLEAN" && rm -fr $PROJECT_BUILD_OUT_IMAGE_PATH
+mkdir -p $PROJECT_BUILD_OUT_IMAGE_PATH
+
+test -n "$BUILD_DSP" && build_rtos_dsp
+test -n "$BUILD_RTOS" && build_rtos_image $1
+test -n "$BUILD_UBOOT" && build_uboot $UBOOT_BOARDNAME
+test -n "$BUILD_IMAGE" && build_aml_image
+
+echo "======Done======"
+echo "Image Path: $PROJECT_BUILD_OUT_IMAGE_PATH "
+ls -la $PROJECT_BUILD_OUT_IMAGE_PATH