dm: eth: Add basic driver model support to Ethernet stack
First just add support for MAC drivers.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
diff --git a/include/net.h b/include/net.h
index df5b648..9c5dea5 100644
--- a/include/net.h
+++ b/include/net.h
@@ -78,6 +78,57 @@
ETH_STATE_ACTIVE
};
+#ifdef CONFIG_DM_ETH
+/**
+ * struct eth_pdata - Platform data for Ethernet MAC controllers
+ *
+ * @iobase: The base address of the hardware registers
+ * @enetaddr: The Ethernet MAC address that is loaded from EEPROM or env
+ */
+struct eth_pdata {
+ phys_addr_t iobase;
+ unsigned char enetaddr[6];
+};
+
+/**
+ * struct eth_ops - functions of Ethernet MAC controllers
+ *
+ * start: Prepare the hardware to send and receive packets
+ * send: Send the bytes passed in "packet" as a packet on the wire
+ * recv: Check if the hardware received a packet. Call the network stack if so
+ * stop: Stop the hardware from looking for packets - may be called even if
+ * state == PASSIVE
+ * mcast: Join or leave a multicast group (for TFTP) - optional
+ * write_hwaddr: Write a MAC address to the hardware (used to pass it to Linux
+ * on some platforms like ARM). This function expects the
+ * eth_pdata::enetaddr field to be populated - optional
+ * read_rom_hwaddr: Some devices have a backup of the MAC address stored in a
+ * ROM on the board. This is how the driver should expose it
+ * to the network stack. This function should fill in the
+ * eth_pdata::enetaddr field - optional
+ */
+struct eth_ops {
+ int (*start)(struct udevice *dev);
+ int (*send)(struct udevice *dev, void *packet, int length);
+ int (*recv)(struct udevice *dev);
+ void (*stop)(struct udevice *dev);
+#ifdef CONFIG_MCAST_TFTP
+ int (*mcast)(struct udevice *dev, const u8 *enetaddr, int join);
+#endif
+ int (*write_hwaddr)(struct udevice *dev);
+ int (*read_rom_hwaddr)(struct udevice *dev);
+};
+
+#define eth_get_ops(dev) ((struct eth_ops *)(dev)->driver->ops)
+
+struct udevice *eth_get_dev(void); /* get the current device */
+unsigned char *eth_get_ethaddr(void); /* get the current device MAC */
+/* Used only when NetConsole is enabled */
+int eth_init_state_only(void); /* Set active state */
+void eth_halt_state_only(void); /* Set passive state */
+#endif
+
+#ifndef CONFIG_DM_ETH
struct eth_device {
char name[16];
unsigned char enetaddr[6];
@@ -144,6 +195,7 @@
int eth_number);
int usb_eth_initialize(bd_t *bi);
+#endif
int eth_initialize(void); /* Initialize network subsystem */
void eth_try_another(int first_restart); /* Change the device */