| Philip Howard | 9894a40 | 2016-02-27 17:33:08 +0000 | [diff] [blame^] | 1 | %pythoncode %{ |
| Philip Howard | c2d3fbc | 2016-02-27 17:29:38 +0000 | [diff] [blame] | 2 | # wiringPi modes |
| 3 | |||||
| 4 | WPI_MODE_PINS = 0; | ||||
| 5 | WPI_MODE_GPIO = 1; | ||||
| 6 | WPI_MODE_GPIO_SYS = 2; | ||||
| 7 | WPI_MODE_PHYS = 3; | ||||
| 8 | WPI_MODE_PIFACE = 4; | ||||
| 9 | WPI_MODE_UNINITIALISED = -1; | ||||
| 10 | |||||
| 11 | # Pin modes | ||||
| 12 | |||||
| 13 | INPUT = 0; | ||||
| 14 | OUTPUT = 1; | ||||
| 15 | PWM_OUTPUT = 2; | ||||
| 16 | GPIO_CLOCK = 3; | ||||
| 17 | SOFT_PWM_OUTPUT = 4; | ||||
| 18 | SOFT_TONE_OUTPUT = 5; | ||||
| 19 | PWM_TONE_OUTPUT = 6; | ||||
| 20 | |||||
| 21 | LOW = 0; | ||||
| 22 | HIGH = 1; | ||||
| 23 | |||||
| 24 | # Pull up/down/none | ||||
| 25 | |||||
| 26 | PUD_OFF = 0; | ||||
| 27 | PUD_DOWN = 1; | ||||
| 28 | PUD_UP = 2; | ||||
| 29 | |||||
| 30 | # PWM | ||||
| 31 | |||||
| 32 | PWM_MODE_MS = 0; | ||||
| 33 | PWM_MODE_BAL = 1; | ||||
| 34 | |||||
| 35 | # Interrupt levels | ||||
| 36 | |||||
| 37 | INT_EDGE_SETUP = 0; | ||||
| 38 | INT_EDGE_FALLING = 1; | ||||
| 39 | INT_EDGE_RISING = 2; | ||||
| 40 | INT_EDGE_BOTH = 3; | ||||
| Philip Howard | 9894a40 | 2016-02-27 17:33:08 +0000 | [diff] [blame^] | 41 | %} |