blob: fdeb312cdabdfdd33699c780d823f9e7979367ac [file] [log] [blame]
Thomas Gleixner2874c5f2019-05-27 08:55:01 +02001/* SPDX-License-Identifier: GPL-2.0-or-later */
Heiko Stübner3f0292a2011-10-05 12:27:05 +02002/*
3 * gpio-regulator.h
4 *
5 * Copyright 2011 Heiko Stuebner <heiko@sntech.de>
6 *
7 * based on fixed.h
8 *
9 * Copyright 2008 Wolfson Microelectronics PLC.
10 *
11 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
12 *
13 * Copyright (c) 2009 Nokia Corporation
14 * Roger Quadros <ext-roger.quadros@nokia.com>
Heiko Stübner3f0292a2011-10-05 12:27:05 +020015 */
16
17#ifndef __REGULATOR_GPIO_H
18#define __REGULATOR_GPIO_H
19
Linus Walleijd6cd33a2019-01-29 11:31:52 +010020#include <linux/gpio/consumer.h>
21
Heiko Stübner3f0292a2011-10-05 12:27:05 +020022struct regulator_init_data;
23
24enum regulator_type;
25
26/**
27 * struct gpio_regulator_state - state description
28 * @value: microvolts or microamps
29 * @gpios: bitfield of gpio target-states for the value
30 *
31 * This structure describes a supported setting of the regulator
32 * and the necessary gpio-state to achieve it.
33 *
34 * The n-th bit in the bitfield describes the state of the n-th GPIO
35 * from the gpios-array defined in gpio_regulator_config below.
36 */
37struct gpio_regulator_state {
38 int value;
39 int gpios;
40};
41
42/**
43 * struct gpio_regulator_config - config structure
44 * @supply_name: Name of the regulator supply
Heiko Stübner3f0292a2011-10-05 12:27:05 +020045 * @enabled_at_boot: Whether regulator has been enabled at
46 * boot or not. 1 = Yes, 0 = No
47 * This is used to keep the regulator at
48 * the default state
49 * @startup_delay: Start-up time in microseconds
Linus Walleijd6cd33a2019-01-29 11:31:52 +010050 * @gflags: Array of GPIO configuration flags for initial
51 * states
52 * @ngpios: Number of GPIOs and configurations available
Heiko Stübner3f0292a2011-10-05 12:27:05 +020053 * @states: Array of gpio_regulator_state entries describing
54 * the gpio state for specific voltages
55 * @nr_states: Number of states available
56 * @regulator_type: either REGULATOR_CURRENT or REGULATOR_VOLTAGE
57 * @init_data: regulator_init_data
58 *
59 * This structure contains gpio-voltage regulator configuration
60 * information that must be passed by platform code to the
61 * gpio-voltage regulator driver.
62 */
63struct gpio_regulator_config {
64 const char *supply_name;
65
Heiko Stübner3f0292a2011-10-05 12:27:05 +020066 unsigned enabled_at_boot:1;
67 unsigned startup_delay;
68
Linus Walleijd6cd33a2019-01-29 11:31:52 +010069 enum gpiod_flags *gflags;
70 int ngpios;
Heiko Stübner3f0292a2011-10-05 12:27:05 +020071
72 struct gpio_regulator_state *states;
73 int nr_states;
74
75 enum regulator_type type;
76 struct regulator_init_data *init_data;
77};
78
79#endif