Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 1 | // SPDX-License-Identifier: GPL-2.0 |
| 2 | /* |
| 3 | * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) |
| 4 | * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) |
| 5 | * Copyright (C) 1999, 2000 Silicon Graphics, Inc. |
| 6 | */ |
| 7 | #include <linux/kernel.h> |
| 8 | #include <linux/export.h> |
| 9 | #include <linux/pci.h> |
| 10 | #include <linux/smp.h> |
| 11 | #include <linux/dma-direct.h> |
| 12 | #include <linux/platform_device.h> |
| 13 | #include <linux/platform_data/xtalk-bridge.h> |
| 14 | |
| 15 | #include <asm/pci/bridge.h> |
| 16 | #include <asm/paccess.h> |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 17 | #include <asm/sn/irq_alloc.h> |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 18 | |
| 19 | /* |
| 20 | * Most of the IOC3 PCI config register aren't present |
| 21 | * we emulate what is needed for a normal PCI enumeration |
| 22 | */ |
| 23 | static u32 emulate_ioc3_cfg(int where, int size) |
| 24 | { |
| 25 | if (size == 1 && where == 0x3d) |
| 26 | return 0x01; |
| 27 | else if (size == 2 && where == 0x3c) |
| 28 | return 0x0100; |
| 29 | else if (size == 4 && where == 0x3c) |
| 30 | return 0x00000100; |
| 31 | |
| 32 | return 0; |
| 33 | } |
| 34 | |
| 35 | static void bridge_disable_swapping(struct pci_dev *dev) |
| 36 | { |
| 37 | struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); |
| 38 | int slot = PCI_SLOT(dev->devfn); |
| 39 | |
| 40 | /* Turn off byte swapping */ |
| 41 | bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR); |
| 42 | bridge_read(bc, b_widget.w_tflush); /* Flush */ |
| 43 | } |
| 44 | |
| 45 | DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, |
| 46 | bridge_disable_swapping); |
| 47 | |
| 48 | |
| 49 | /* |
| 50 | * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is |
| 51 | * not really documented, so right now I can't write code which uses it. |
| 52 | * Therefore we use type 0 accesses for now even though they won't work |
| 53 | * correctly for PCI-to-PCI bridges. |
| 54 | * |
| 55 | * The function is complicated by the ultimate brokenness of the IOC3 chip |
| 56 | * which is used in SGI systems. The IOC3 can only handle 32-bit PCI |
| 57 | * accesses and does only decode parts of it's address space. |
| 58 | */ |
| 59 | static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn, |
| 60 | int where, int size, u32 *value) |
| 61 | { |
| 62 | struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| 63 | struct bridge_regs *bridge = bc->base; |
| 64 | int slot = PCI_SLOT(devfn); |
| 65 | int fn = PCI_FUNC(devfn); |
| 66 | void *addr; |
| 67 | u32 cf, shift, mask; |
| 68 | int res; |
| 69 | |
| 70 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; |
| 71 | if (get_dbe(cf, (u32 *)addr)) |
| 72 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 73 | |
| 74 | /* |
| 75 | * IOC3 is broken beyond belief ... Don't even give the |
| 76 | * generic PCI code a chance to look at it for real ... |
| 77 | */ |
| 78 | if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| 79 | goto is_ioc3; |
| 80 | |
| 81 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; |
| 82 | |
| 83 | if (size == 1) |
| 84 | res = get_dbe(*value, (u8 *)addr); |
| 85 | else if (size == 2) |
| 86 | res = get_dbe(*value, (u16 *)addr); |
| 87 | else |
| 88 | res = get_dbe(*value, (u32 *)addr); |
| 89 | |
| 90 | return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| 91 | |
| 92 | is_ioc3: |
| 93 | |
| 94 | /* |
| 95 | * IOC3 special handling |
| 96 | */ |
| 97 | if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { |
| 98 | *value = emulate_ioc3_cfg(where, size); |
| 99 | return PCIBIOS_SUCCESSFUL; |
| 100 | } |
| 101 | |
| 102 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| 103 | if (get_dbe(cf, (u32 *)addr)) |
| 104 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 105 | |
| 106 | shift = ((where & 3) << 3); |
| 107 | mask = (0xffffffffU >> ((4 - size) << 3)); |
| 108 | *value = (cf >> shift) & mask; |
| 109 | |
| 110 | return PCIBIOS_SUCCESSFUL; |
| 111 | } |
| 112 | |
| 113 | static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn, |
| 114 | int where, int size, u32 *value) |
| 115 | { |
| 116 | struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| 117 | struct bridge_regs *bridge = bc->base; |
| 118 | int busno = bus->number; |
| 119 | int slot = PCI_SLOT(devfn); |
| 120 | int fn = PCI_FUNC(devfn); |
| 121 | void *addr; |
| 122 | u32 cf, shift, mask; |
| 123 | int res; |
| 124 | |
| 125 | bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); |
| 126 | addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; |
| 127 | if (get_dbe(cf, (u32 *)addr)) |
| 128 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 129 | |
| 130 | /* |
| 131 | * IOC3 is broken beyond belief ... Don't even give the |
| 132 | * generic PCI code a chance to look at it for real ... |
| 133 | */ |
| 134 | if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| 135 | goto is_ioc3; |
| 136 | |
| 137 | addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; |
| 138 | |
| 139 | if (size == 1) |
| 140 | res = get_dbe(*value, (u8 *)addr); |
| 141 | else if (size == 2) |
| 142 | res = get_dbe(*value, (u16 *)addr); |
| 143 | else |
| 144 | res = get_dbe(*value, (u32 *)addr); |
| 145 | |
| 146 | return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL; |
| 147 | |
| 148 | is_ioc3: |
| 149 | |
| 150 | /* |
| 151 | * IOC3 special handling |
| 152 | */ |
| 153 | if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { |
| 154 | *value = emulate_ioc3_cfg(where, size); |
| 155 | return PCIBIOS_SUCCESSFUL; |
| 156 | } |
| 157 | |
| 158 | addr = &bridge->b_type1_cfg.c[(fn << 8) | where]; |
| 159 | if (get_dbe(cf, (u32 *)addr)) |
| 160 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 161 | |
| 162 | shift = ((where & 3) << 3); |
| 163 | mask = (0xffffffffU >> ((4 - size) << 3)); |
| 164 | *value = (cf >> shift) & mask; |
| 165 | |
| 166 | return PCIBIOS_SUCCESSFUL; |
| 167 | } |
| 168 | |
| 169 | static int pci_read_config(struct pci_bus *bus, unsigned int devfn, |
| 170 | int where, int size, u32 *value) |
| 171 | { |
| 172 | if (!pci_is_root_bus(bus)) |
| 173 | return pci_conf1_read_config(bus, devfn, where, size, value); |
| 174 | |
| 175 | return pci_conf0_read_config(bus, devfn, where, size, value); |
| 176 | } |
| 177 | |
| 178 | static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn, |
| 179 | int where, int size, u32 value) |
| 180 | { |
| 181 | struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| 182 | struct bridge_regs *bridge = bc->base; |
| 183 | int slot = PCI_SLOT(devfn); |
| 184 | int fn = PCI_FUNC(devfn); |
| 185 | void *addr; |
| 186 | u32 cf, shift, mask, smask; |
| 187 | int res; |
| 188 | |
| 189 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID]; |
| 190 | if (get_dbe(cf, (u32 *)addr)) |
| 191 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 192 | |
| 193 | /* |
| 194 | * IOC3 is broken beyond belief ... Don't even give the |
| 195 | * generic PCI code a chance to look at it for real ... |
| 196 | */ |
| 197 | if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| 198 | goto is_ioc3; |
| 199 | |
| 200 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)]; |
| 201 | |
| 202 | if (size == 1) |
| 203 | res = put_dbe(value, (u8 *)addr); |
| 204 | else if (size == 2) |
| 205 | res = put_dbe(value, (u16 *)addr); |
| 206 | else |
| 207 | res = put_dbe(value, (u32 *)addr); |
| 208 | |
| 209 | if (res) |
| 210 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 211 | |
| 212 | return PCIBIOS_SUCCESSFUL; |
| 213 | |
| 214 | is_ioc3: |
| 215 | |
| 216 | /* |
| 217 | * IOC3 special handling |
| 218 | */ |
| 219 | if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) |
| 220 | return PCIBIOS_SUCCESSFUL; |
| 221 | |
| 222 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| 223 | |
| 224 | if (get_dbe(cf, (u32 *)addr)) |
| 225 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 226 | |
| 227 | shift = ((where & 3) << 3); |
| 228 | mask = (0xffffffffU >> ((4 - size) << 3)); |
| 229 | smask = mask << shift; |
| 230 | |
| 231 | cf = (cf & ~smask) | ((value & mask) << shift); |
| 232 | if (put_dbe(cf, (u32 *)addr)) |
| 233 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 234 | |
| 235 | return PCIBIOS_SUCCESSFUL; |
| 236 | } |
| 237 | |
| 238 | static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn, |
| 239 | int where, int size, u32 value) |
| 240 | { |
| 241 | struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
| 242 | struct bridge_regs *bridge = bc->base; |
| 243 | int slot = PCI_SLOT(devfn); |
| 244 | int fn = PCI_FUNC(devfn); |
| 245 | int busno = bus->number; |
| 246 | void *addr; |
| 247 | u32 cf, shift, mask, smask; |
| 248 | int res; |
| 249 | |
| 250 | bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11)); |
| 251 | addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID]; |
| 252 | if (get_dbe(cf, (u32 *)addr)) |
| 253 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 254 | |
| 255 | /* |
| 256 | * IOC3 is broken beyond belief ... Don't even give the |
| 257 | * generic PCI code a chance to look at it for real ... |
| 258 | */ |
| 259 | if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) |
| 260 | goto is_ioc3; |
| 261 | |
| 262 | addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))]; |
| 263 | |
| 264 | if (size == 1) |
| 265 | res = put_dbe(value, (u8 *)addr); |
| 266 | else if (size == 2) |
| 267 | res = put_dbe(value, (u16 *)addr); |
| 268 | else |
| 269 | res = put_dbe(value, (u32 *)addr); |
| 270 | |
| 271 | if (res) |
| 272 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 273 | |
| 274 | return PCIBIOS_SUCCESSFUL; |
| 275 | |
| 276 | is_ioc3: |
| 277 | |
| 278 | /* |
| 279 | * IOC3 special handling |
| 280 | */ |
| 281 | if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) |
| 282 | return PCIBIOS_SUCCESSFUL; |
| 283 | |
| 284 | addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2]; |
| 285 | if (get_dbe(cf, (u32 *)addr)) |
| 286 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 287 | |
| 288 | shift = ((where & 3) << 3); |
| 289 | mask = (0xffffffffU >> ((4 - size) << 3)); |
| 290 | smask = mask << shift; |
| 291 | |
| 292 | cf = (cf & ~smask) | ((value & mask) << shift); |
| 293 | if (put_dbe(cf, (u32 *)addr)) |
| 294 | return PCIBIOS_DEVICE_NOT_FOUND; |
| 295 | |
| 296 | return PCIBIOS_SUCCESSFUL; |
| 297 | } |
| 298 | |
| 299 | static int pci_write_config(struct pci_bus *bus, unsigned int devfn, |
| 300 | int where, int size, u32 value) |
| 301 | { |
| 302 | if (!pci_is_root_bus(bus)) |
| 303 | return pci_conf1_write_config(bus, devfn, where, size, value); |
| 304 | |
| 305 | return pci_conf0_write_config(bus, devfn, where, size, value); |
| 306 | } |
| 307 | |
| 308 | static struct pci_ops bridge_pci_ops = { |
| 309 | .read = pci_read_config, |
| 310 | .write = pci_write_config, |
| 311 | }; |
| 312 | |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 313 | struct bridge_irq_chip_data { |
| 314 | struct bridge_controller *bc; |
| 315 | nasid_t nasid; |
| 316 | }; |
| 317 | |
| 318 | static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask, |
| 319 | bool force) |
| 320 | { |
| 321 | #ifdef CONFIG_NUMA |
| 322 | struct bridge_irq_chip_data *data = d->chip_data; |
| 323 | int bit = d->parent_data->hwirq; |
| 324 | int pin = d->hwirq; |
| 325 | nasid_t nasid; |
| 326 | int ret, cpu; |
| 327 | |
| 328 | ret = irq_chip_set_affinity_parent(d, mask, force); |
| 329 | if (ret >= 0) { |
| 330 | cpu = cpumask_first_and(mask, cpu_online_mask); |
| 331 | nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu)); |
| 332 | bridge_write(data->bc, b_int_addr[pin].addr, |
| 333 | (((data->bc->intr_addr >> 30) & 0x30000) | |
| 334 | bit | (nasid << 8))); |
| 335 | bridge_read(data->bc, b_wid_tflush); |
| 336 | } |
| 337 | return ret; |
| 338 | #else |
| 339 | return irq_chip_set_affinity_parent(d, mask, force); |
| 340 | #endif |
| 341 | } |
| 342 | |
| 343 | struct irq_chip bridge_irq_chip = { |
| 344 | .name = "BRIDGE", |
| 345 | .irq_mask = irq_chip_mask_parent, |
| 346 | .irq_unmask = irq_chip_unmask_parent, |
| 347 | .irq_set_affinity = bridge_set_affinity |
| 348 | }; |
| 349 | |
| 350 | static int bridge_domain_alloc(struct irq_domain *domain, unsigned int virq, |
| 351 | unsigned int nr_irqs, void *arg) |
| 352 | { |
| 353 | struct bridge_irq_chip_data *data; |
| 354 | struct irq_alloc_info *info = arg; |
| 355 | int ret; |
| 356 | |
| 357 | if (nr_irqs > 1 || !info) |
| 358 | return -EINVAL; |
| 359 | |
| 360 | data = kzalloc(sizeof(*data), GFP_KERNEL); |
| 361 | if (!data) |
| 362 | return -ENOMEM; |
| 363 | |
| 364 | ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg); |
| 365 | if (ret >= 0) { |
| 366 | data->bc = info->ctrl; |
| 367 | data->nasid = info->nasid; |
| 368 | irq_domain_set_info(domain, virq, info->pin, &bridge_irq_chip, |
| 369 | data, handle_level_irq, NULL, NULL); |
| 370 | } else { |
| 371 | kfree(data); |
| 372 | } |
| 373 | |
| 374 | return ret; |
| 375 | } |
| 376 | |
| 377 | static void bridge_domain_free(struct irq_domain *domain, unsigned int virq, |
| 378 | unsigned int nr_irqs) |
| 379 | { |
| 380 | struct irq_data *irqd = irq_domain_get_irq_data(domain, virq); |
| 381 | |
| 382 | if (nr_irqs) |
| 383 | return; |
| 384 | |
| 385 | kfree(irqd->chip_data); |
| 386 | irq_domain_free_irqs_top(domain, virq, nr_irqs); |
| 387 | } |
| 388 | |
| 389 | static int bridge_domain_activate(struct irq_domain *domain, |
| 390 | struct irq_data *irqd, bool reserve) |
| 391 | { |
| 392 | struct bridge_irq_chip_data *data = irqd->chip_data; |
| 393 | struct bridge_controller *bc = data->bc; |
| 394 | int bit = irqd->parent_data->hwirq; |
| 395 | int pin = irqd->hwirq; |
| 396 | u32 device; |
| 397 | |
| 398 | bridge_write(bc, b_int_addr[pin].addr, |
| 399 | (((bc->intr_addr >> 30) & 0x30000) | |
| 400 | bit | (data->nasid << 8))); |
| 401 | bridge_set(bc, b_int_enable, (1 << pin)); |
| 402 | bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */ |
| 403 | |
| 404 | /* |
| 405 | * Enable sending of an interrupt clear packt to the hub on a high to |
| 406 | * low transition of the interrupt pin. |
| 407 | * |
| 408 | * IRIX sets additional bits in the address which are documented as |
| 409 | * reserved in the bridge docs. |
| 410 | */ |
| 411 | bridge_set(bc, b_int_mode, (1UL << pin)); |
| 412 | |
| 413 | /* |
| 414 | * We assume the bridge to have a 1:1 mapping between devices |
| 415 | * (slots) and intr pins. |
| 416 | */ |
| 417 | device = bridge_read(bc, b_int_device); |
| 418 | device &= ~(7 << (pin*3)); |
| 419 | device |= (pin << (pin*3)); |
| 420 | bridge_write(bc, b_int_device, device); |
| 421 | |
| 422 | bridge_read(bc, b_wid_tflush); |
| 423 | return 0; |
| 424 | } |
| 425 | |
| 426 | static void bridge_domain_deactivate(struct irq_domain *domain, |
| 427 | struct irq_data *irqd) |
| 428 | { |
| 429 | struct bridge_irq_chip_data *data = irqd->chip_data; |
| 430 | |
| 431 | bridge_clr(data->bc, b_int_enable, (1 << irqd->hwirq)); |
| 432 | bridge_read(data->bc, b_wid_tflush); |
| 433 | } |
| 434 | |
| 435 | static const struct irq_domain_ops bridge_domain_ops = { |
| 436 | .alloc = bridge_domain_alloc, |
| 437 | .free = bridge_domain_free, |
| 438 | .activate = bridge_domain_activate, |
| 439 | .deactivate = bridge_domain_deactivate |
| 440 | }; |
| 441 | |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 442 | /* |
| 443 | * All observed requests have pin == 1. We could have a global here, that |
| 444 | * gets incremented and returned every time - unfortunately, pci_map_irq |
| 445 | * may be called on the same device over and over, and need to return the |
| 446 | * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. |
| 447 | * |
| 448 | * A given PCI device, in general, should be able to intr any of the cpus |
| 449 | * on any one of the hubs connected to its xbow. |
| 450 | */ |
| 451 | static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) |
| 452 | { |
| 453 | struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 454 | struct irq_alloc_info info; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 455 | int irq; |
| 456 | |
| 457 | irq = bc->pci_int[slot]; |
| 458 | if (irq == -1) { |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 459 | info.ctrl = bc; |
| 460 | info.nasid = bc->nasid; |
| 461 | info.pin = slot; |
| 462 | |
| 463 | irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info); |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 464 | if (irq < 0) |
| 465 | return irq; |
| 466 | |
| 467 | bc->pci_int[slot] = irq; |
| 468 | } |
| 469 | return irq; |
| 470 | } |
| 471 | |
| 472 | static int bridge_probe(struct platform_device *pdev) |
| 473 | { |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 474 | struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev); |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 475 | struct device *dev = &pdev->dev; |
| 476 | struct bridge_controller *bc; |
| 477 | struct pci_host_bridge *host; |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 478 | struct irq_domain *domain, *parent; |
| 479 | struct fwnode_handle *fn; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 480 | int slot; |
| 481 | int err; |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 482 | |
| 483 | parent = irq_get_default_host(); |
| 484 | if (!parent) |
| 485 | return -ENODEV; |
| 486 | fn = irq_domain_alloc_named_fwnode("BRIDGE"); |
| 487 | if (!fn) |
| 488 | return -ENOMEM; |
| 489 | domain = irq_domain_create_hierarchy(parent, 0, 8, fn, |
| 490 | &bridge_domain_ops, NULL); |
| 491 | irq_domain_free_fwnode(fn); |
| 492 | if (!domain) |
| 493 | return -ENOMEM; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 494 | |
| 495 | pci_set_flags(PCI_PROBE_ONLY); |
| 496 | |
| 497 | host = devm_pci_alloc_host_bridge(dev, sizeof(*bc)); |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 498 | if (!host) { |
| 499 | err = -ENOMEM; |
| 500 | goto err_remove_domain; |
| 501 | } |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 502 | |
| 503 | bc = pci_host_bridge_priv(host); |
| 504 | |
| 505 | bc->busn.name = "Bridge PCI busn"; |
| 506 | bc->busn.start = 0; |
| 507 | bc->busn.end = 0xff; |
| 508 | bc->busn.flags = IORESOURCE_BUS; |
| 509 | |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 510 | bc->domain = domain; |
| 511 | |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 512 | pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset); |
| 513 | pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset); |
| 514 | pci_add_resource(&host->windows, &bc->busn); |
| 515 | |
| 516 | err = devm_request_pci_bus_resources(dev, &host->windows); |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 517 | if (err < 0) |
| 518 | goto err_free_resource; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 519 | |
| 520 | bc->nasid = bd->nasid; |
| 521 | |
| 522 | bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR; |
| 523 | bc->base = (struct bridge_regs *)bd->bridge_addr; |
| 524 | bc->intr_addr = bd->intr_addr; |
| 525 | |
| 526 | /* |
| 527 | * Clear all pending interrupts. |
| 528 | */ |
| 529 | bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR); |
| 530 | |
| 531 | /* |
| 532 | * Until otherwise set up, assume all interrupts are from slot 0 |
| 533 | */ |
| 534 | bridge_write(bc, b_int_device, 0x0); |
| 535 | |
| 536 | /* |
| 537 | * disable swapping for big windows |
| 538 | */ |
| 539 | bridge_clr(bc, b_wid_control, |
| 540 | BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP); |
| 541 | #ifdef CONFIG_PAGE_SIZE_4KB |
| 542 | bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); |
| 543 | #else /* 16kB or larger */ |
| 544 | bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE); |
| 545 | #endif |
| 546 | |
| 547 | /* |
| 548 | * Hmm... IRIX sets additional bits in the address which |
| 549 | * are documented as reserved in the bridge docs. |
| 550 | */ |
| 551 | bridge_write(bc, b_wid_int_upper, |
| 552 | ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16)); |
| 553 | bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff); |
| 554 | bridge_write(bc, b_dir_map, (bd->masterwid << 20)); /* DMA */ |
| 555 | bridge_write(bc, b_int_enable, 0); |
| 556 | |
| 557 | for (slot = 0; slot < 8; slot++) { |
| 558 | bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR); |
| 559 | bc->pci_int[slot] = -1; |
| 560 | } |
| 561 | bridge_read(bc, b_wid_tflush); /* wait until Bridge PIO complete */ |
| 562 | |
| 563 | host->dev.parent = dev; |
| 564 | host->sysdata = bc; |
| 565 | host->busnr = 0; |
| 566 | host->ops = &bridge_pci_ops; |
| 567 | host->map_irq = bridge_map_irq; |
| 568 | host->swizzle_irq = pci_common_swizzle; |
| 569 | |
| 570 | err = pci_scan_root_bus_bridge(host); |
| 571 | if (err < 0) |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 572 | goto err_free_resource; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 573 | |
| 574 | pci_bus_claim_resources(host->bus); |
| 575 | pci_bus_add_devices(host->bus); |
| 576 | |
| 577 | platform_set_drvdata(pdev, host->bus); |
| 578 | |
| 579 | return 0; |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 580 | |
| 581 | err_free_resource: |
| 582 | pci_free_resource_list(&host->windows); |
| 583 | err_remove_domain: |
| 584 | irq_domain_remove(domain); |
| 585 | return err; |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 586 | } |
| 587 | |
| 588 | static int bridge_remove(struct platform_device *pdev) |
| 589 | { |
| 590 | struct pci_bus *bus = platform_get_drvdata(pdev); |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 591 | struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 592 | |
Thomas Bogendoerfer | e6308b6 | 2019-05-07 23:09:15 +0200 | [diff] [blame] | 593 | irq_domain_remove(bc->domain); |
Thomas Bogendoerfer | a57140e | 2019-05-07 23:09:13 +0200 | [diff] [blame] | 594 | pci_lock_rescan_remove(); |
| 595 | pci_stop_root_bus(bus); |
| 596 | pci_remove_root_bus(bus); |
| 597 | pci_unlock_rescan_remove(); |
| 598 | |
| 599 | return 0; |
| 600 | } |
| 601 | |
| 602 | static struct platform_driver bridge_driver = { |
| 603 | .probe = bridge_probe, |
| 604 | .remove = bridge_remove, |
| 605 | .driver = { |
| 606 | .name = "xtalk-bridge", |
| 607 | } |
| 608 | }; |
| 609 | |
| 610 | builtin_platform_driver(bridge_driver); |