| /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ |
| /* |
| * Copyright (c) 2019 Amlogic, Inc. All rights reserved. |
| */ |
| |
| #ifndef __BOARD_CFG_H__ |
| #define __BOARD_CFG_H__ |
| |
| #include <asm/amlogic/arch/cpu.h> |
| |
| /* |
| * platform power init config |
| */ |
| |
| #define AML_VCCK_INIT_VOLTAGE 959 //VCCK power up voltage |
| #define AML_VDDEE_INIT_VOLTAGE 800 // VDDEE power up voltage |
| |
| /*Distinguish whether to use efuse to adjust vddee*/ |
| #define CONFIG_PDVFS_ENABLE |
| |
| /* SMP definitions */ |
| #define CPU_RELEASE_ADDR secondary_boot_func |
| |
| /* Serial config */ |
| #define CONFIG_CONS_INDEX 2 |
| //#define CONFIG_BAUDRATE 115200 |
| |
| /*if disable uboot console, enable it*/ |
| //#define CONFIG_SILENT_CONSOLE |
| #ifdef CONFIG_SILENT_CONSOLE |
| #undef CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC |
| #endif |
| |
| /*low console baudrate*/ |
| #define CONFIG_LOW_CONSOLE_BAUD 0 |
| |
| /* Enable ir remote wake up for bl30 */ |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL1 0xef10fe01 //amlogic tv ir --- power |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL2 0XBB44FB04 //amlogic tv ir --- ch+ |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL3 0xF20DFE01 //amlogic tv ir --- ch- |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL4 0XBA45BD02 //amlogic small ir--- power |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL5 0xe51afb04 |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL6 0xFFFFFFFF |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL7 0xFFFFFFFF |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL8 0xFFFFFFFF |
| #define AML_IR_REMOTE_POWER_UP_KEY_VAL9 0xFFFFFFFF |
| |
| /*config the default parameters for adc power key*/ |
| #define AML_ADC_POWER_KEY_CHAN 2 /*channel range: 0-7*/ |
| #define AML_ADC_POWER_KEY_VAL 0 /*sample value range: 0-1023*/ |
| |
| /* AVB */ |
| #define CONFIG_AML_AVB2_ANTIROLLBACK 1 |
| #define CONFIG_AVB_VERIFY 1 |
| |
| /* Bootloader Control Block function |
| That is used for recovery and the bootloader to talk to each other |
| */ |
| #ifndef CONFIG_PXP_DDR |
| #define CONFIG_BOOTLOADER_CONTROL_BLOCK |
| #endif// #ifndef CONFIG_PXP_DDR |
| |
| /* args/envs */ |
| #define CONFIG_SYS_MAXARGS 64 |
| |
| /* AVB */ |
| #define CONFIG_AML_AVB2_ANTIROLLBACK 1 |
| #define CONFIG_AVB_VERIFY 1 |
| #define CONFIG_SUPPORT_EMMC_RPMB 1 |
| #define CONFIG_AML_DEV_ID 1 |
| |
| //for common env list, please maintain it in board/amlogic/env/linux.env |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "scramble_reg=0xfe02e030\0"\ |
| "uart_base=0xfe07a000\0"\ |
| "usb_burning=" CONFIG_USB_TOOL_ENTRY "\0"\ |
| "outputmode=1080p60hz\0"\ |
| "hdmimode=none\0"\ |
| "connector0_type=HDMI-A-A\0" \ |
| "qms_en=1\0"\ |
| "colorattribute=444,8bit\0"\ |
| "cvbsmode=576cvbs\0"\ |
| "cvbs_drv=0\0"\ |
| "display_width=1920\0"\ |
| "display_height=1080\0"\ |
| "display_bpp=16\0"\ |
| "display_color_index=16\0"\ |
| "display_layer=osd0\0"\ |
| "display_color_fg=0xffff\0"\ |
| "display_color_bg=0\0"\ |
| "dtb_mem_addr=0x01000000\0"\ |
| "hdmichecksum=0x00000000\0"\ |
| "fb_addr=0x00300000\0"\ |
| "fb_width=1920\0"\ |
| "fb_height=1080\0"\ |
| "dolby_status=0\0"\ |
| "dolby_vision_on=0\0"\ |
| "boot_part=boot\0"\ |
| "recovery_part=recovery\0"\ |
| "Irq_check_en=0\0"\ |
| "dv_fw_dir_vendor=/vendor/firmware/dovi_fw.bin\0"\ |
| "dv_fw_dir_odm_ext=/odm_ext/firmware/dovi_fw.bin\0"\ |
| "dv_fw_dir=/oem/firmware/dovi_fw.bin\0"\ |
| "hdr_policy=0\0"\ |
| "config_csc_en=1\0"\ |
| "frac_rate_policy=1\0"\ |
| "upgrade_key="\ |
| "run upgrade_key_base;"\ |
| "echo usr key;"\ |
| "\0"\ |
| "board=ross\0"\ |
| |
| #ifndef CONFIG_PXP_DDR |
| #define CONFIG_PREBOOT \ |
| "run bcb_cmd; "\ |
| "run upgrade_check;"\ |
| "run init_display;"\ |
| "run storeargs;"\ |
| "run upgrade_key;" \ |
| "bcb uboot-command;"\ |
| "run switch_bootmode;" |
| #else |
| #define CONFIG_PREBOOT "echo preboot" |
| #define CONFIG_ENV_IS_NOWHERE 0 |
| #endif |
| //#define CONFIG_ENV_SIZE (64 * 1024) |
| #define CONFIG_FIT 1 |
| #define CONFIG_OF_LIBFDT 1 |
| #define CONFIG_ANDROID_BOOT_IMAGE 1 |
| //#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size*/ |
| |
| /* ATTENTION */ |
| /* DDR configs move to board/amlogic/[board]/firmware/timing.c */ |
| |
| /* running in sram */ |
| //#define UBOOT_RUN_IN_SRAM |
| #ifdef UBOOT_RUN_IN_SRAM |
| #define CONFIG_SYS_INIT_SP_ADDR (0x00200000) |
| /* Size of malloc() pool */ |
| //#define CONFIG_SYS_MALLOC_LEN (256 * 1024) |
| #else |
| #define CONFIG_SYS_INIT_SP_ADDR (0x00200000) |
| //#define CONFIG_SYS_MALLOC_LEN (96 * 1024 * 1024) |
| #endif |
| |
| //#define CONFIG_NR_DRAM_BANKS 1 |
| /* ddr functions */ |
| #define DDR_FULL_TEST 0 //0:disable, 1:enable. ddr full test |
| #define DDR_LOW_POWER 0 //0:disable, 1:enable. ddr clk gate for lp |
| #define DDR_ZQ_PD 0 //0:disable, 1:enable. ddr zq power down |
| #define DDR_USE_EXT_VREF 0 //0:disable, 1:enable. ddr use external vref |
| #define DDR4_TIMING_TEST 0 //0:disable, 1:enable. ddr4 timing test function |
| #define DDR_PLL_BYPASS 0 //0:disable, 1:enable. ddr pll bypass function |
| |
| /* storage: emmc/nand/sd */ |
| #define CONFIG_ENV_OVERWRITE |
| /* #define CONFIG_CMD_SAVEENV */ |
| /* fixme, need fix*/ |
| |
| #if (defined(CONFIG_ENV_IS_IN_AMLNAND) || defined(CONFIG_ENV_IS_IN_MMC)) && \ |
| defined(CONFIG_STORE_COMPATIBLE) |
| #error env in amlnand/mmc already be compatible; |
| #endif |
| |
| /* |
| * storage |
| * |---------|---------| |
| * | | |
| * emmc<--Compatible-->nand |
| * |-------|-------| |
| * | | |
| * MTD<-Exclusive->NFTL |
| * | |
| * |***************|***************| |
| * slc-nand SPI-nand SPI-nor |
| * (raw nand) |
| */ |
| /* axg only support slc nand */ |
| /* swither for mtd nand which is for slc only. */ |
| |
| #if defined(CONFIG_AML_NAND) && defined(CONFIG_MESON_NFC) |
| #error CONFIG_AML_NAND/CONFIG_MESON_NFC can not support at the sametime; |
| #endif |
| |
| #if (defined(CONFIG_AML_NAND) || defined(CONFIG_MESON_NFC)) && defined(CONFIG_MESON_FBOOT) |
| #error CONFIG_AML_NAND/CONFIG_MESON_NFC CONFIG _MESON_FBOOT can not support at the sametime; |
| #endif |
| |
| #if defined(CONFIG_SPI_NAND) && defined(CONFIG_MTD_SPI_NAND) && defined(CONFIG_MESON_NFC) |
| #error CONFIG_SPI_NAND/CONFIG_MTD_SPI_NAND/CONFIG_MESON_NFC can not support at the sametime; |
| #endif |
| /* mtd device board config */ |
| #define BOARD_BOOT_LAYOUT_DISCRETE_BL2 1 |
| #define CONFIG_BL2_COPY_NUM 8 |
| #define CONFIG_NAND_TPL_COPY_NUM 2 |
| #define CONFIG_NOR_TPL_COPY_NUM 1 |
| #define CONFIG_TPL_SIZE_PER_COPY 0x380000 |
| #define CONFIG_BOOTLOADER_SIZE 0x380000 |
| |
| #define BOOTLOADER_MODE_NAND ADVANCE_BOOTLOADER |
| #define BOOTLOADER_MODE_SNAND ADVANCE_BOOTLOADER |
| #define BOOTLOADER_MODE_SNOR COMPACT_BOOTLOADER |
| #define BOOTLOADER_MODE_ADVANCE_INIT 1 |
| #define BOOTLOADER_DDR_FIP_SIZE 0x40000 |
| |
| /* mtd device rsv board config */ |
| #ifndef CONFIG_ENV_IS_IN_NAND |
| #define MTD_RSV_ENV_BLOCK_CNT 4 |
| #else |
| #define MTD_RSV_ENV_BLOCK_CNT 0 |
| #endif |
| |
| #define MTD_RSV_KEY_BLOCK_CNT 8 |
| |
| #ifndef CONFIG_DTB_BIND_KERNEL |
| #define MTD_RSV_DTB_BLOCK_CNT 4 |
| #else |
| #define MTD_RSV_DTB_BLOCK_CNT 0 |
| #endif |
| |
| #define MTD_RSV_DDR_BLOCK_CNT 0 |
| |
| #define MTD_RSV_KEY_SIZE 0x8000 |
| #define MTD_RSV_DTB_SIZE 0x10000 |
| #define MTD_RSV_DDR_SIZE 0x10000 |
| #define MTD_RSV_BLOCK_CNT \ |
| (MTD_RSV_ENV_BLOCK_CNT + \ |
| MTD_RSV_KEY_BLOCK_CNT + \ |
| MTD_RSV_DTB_BLOCK_CNT + \ |
| MTD_RSV_DDR_BLOCK_CNT + 4) |
| |
| /* |
| * use BOARD_CONFIG_BL2_LAYOUT_TYPE to select the BL2 layout: |
| * 0 : indicates bl2 is aligned with block size |
| * 1 : indicates bl2 is fixed size with 512 pages |
| * 2 : indicates bl2 is fixed size with 1024 pages |
| */ |
| #define BOARD_CONFIG_BL2_LAYOUT_TYPE 1 |
| |
| /* #define CONFIG_AML_SD_EMMC 1 */ |
| #ifdef CONFIG_AML_SD_EMMC |
| #define CONFIG_GENERIC_MMC 1 |
| #define CONFIG_CMD_MMC 1 |
| #define CONFIG_CMD_GPT 1 |
| #define CONFIG_SYS_MMC_ENV_DEV 1 |
| #define CONFIG_EMMC_DDR52_EN 0 |
| #define CONFIG_EMMC_DDR52_CLK 35000000 |
| #endif |
| #define CONFIG_PARTITIONS 1 |
| #if 0 |
| #define CONFIG_SYS_NO_FLASH 1 |
| #endif |
| |
| #if defined CONFIG_MESON_NFC || defined CONFIG_SPI_NAND || defined CONFIG_MTD_SPI_NAND |
| #define CONFIG_SYS_MAX_NAND_DEVICE 2 |
| #endif |
| |
| /* vpu */ |
| #define AML_VPU_CLK_LEVEL_DFT 8 |
| #define AML_VPU_CLK_LEVEL_DFT_REVB 7 |
| |
| /* osd */ |
| #define OSD_SCALE_ENABLE |
| #define AML_OSD_HIGH_VERSION |
| |
| /* USB |
| * Enable CONFIG_MUSB_HCD for Host functionalities MSC, keyboard |
| * Enable CONFIG_MUSB_UDD for Device functionalities. |
| */ |
| /* #define CONFIG_MUSB_UDC 1 */ |
| /* #define CONFIG_CMD_USB 1 */ |
| #define CONFIG_CMD_CC 1 |
| #define CONFIG_CMD_BC 1 |
| |
| #define USB_PHY2_PLL_PARAMETER_1 0x09400414 |
| #define USB_PHY2_PLL_PARAMETER_2 0x927e0000 |
| #define USB_PHY2_PLL_PARAMETER_3 0xAC5F49E5 |
| |
| #define USB_G12x_PHY_PLL_SETTING_1 (0xfe18) |
| #define USB_G12x_PHY_PLL_SETTING_2 (0xfff) |
| #define USB_G12x_PHY_PLL_SETTING_3 (0x78000) |
| #define USB_G12x_PHY_PLL_SETTING_4 (0xe0004) |
| #define USB_G12x_PHY_PLL_SETTING_5 (0xe000c) |
| |
| #define AML_TXLX_USB 1 |
| #define AML_USB_V2 1 |
| #define USB_GENERAL_BIT 3 |
| #define USB_PHY21_BIT 4 |
| |
| /* UBOOT fastboot config */ |
| |
| /* UBOOT factory usb/sdcard burning config */ |
| |
| /* net */ |
| /* #define CONFIG_CMD_NET 1 */ |
| #define CONFIG_ETH_DESIGNWARE |
| #if defined(CONFIG_CMD_NET) |
| //#define CONFIG_DESIGNWARE_ETH 1 |
| #define CONFIG_PHYLIB 1 |
| //#define CONFIG_NET_MULTI 1 |
| #define CONFIG_CMD_PING 1 |
| #define CONFIG_CMD_DHCP 1 |
| #define CONFIG_CMD_RARP 1 |
| #define CONFIG_HOSTNAME "arm_gxbb" |
| #if 0 |
| #define CONFIG_RANDOM_ETHADDR 1 /* use random eth addr, or default */ |
| #endif |
| //#define CONFIG_ETHADDR 00:15:18:01:81:31 /* Ethernet address */ |
| #define CONFIG_IPADDR 10.18.9.97 /* Our ip address */ |
| #define CONFIG_GATEWAYIP 10.18.9.1 /* Our getway ip address */ |
| #define CONFIG_SERVERIP 10.18.9.113 /* Tftp server ip address */ |
| #define CONFIG_NETMASK 255.255.255.0 |
| #endif /* (CONFIG_CMD_NET) */ |
| |
| #define MAC_ADDR_NEW 1 |
| |
| /* other devices */ |
| #define CONFIG_SHA1 1 |
| #define CONFIG_MD5 1 |
| |
| /* commands */ |
| /* #define CONFIG_CMD_PLLTEST 1 */ |
| |
| /*file system*/ |
| #define CONFIG_DOS_PARTITION 1 |
| #define CONFIG_EFI_PARTITION 1 |
| /* #define CONFIG_MMC 1 */ |
| #define CONFIG_FS_FAT 1 |
| #define CONFIG_FS_EXT4 1 |
| #define CONFIG_LZO 1 |
| |
| #define CONFIG_FAT_WRITE 1 |
| #define CONFIG_AML_FACTORY_PROVISION 1 |
| |
| #define CONFIG_AML_WATERMARK 1 |
| |
| /* Cache Definitions */ |
| /* #define CONFIG_SYS_DCACHE_OFF */ |
| /* #define CONFIG_SYS_ICACHE_OFF */ |
| |
| /* other functions */ |
| #define CONFIG_LIBAVB 1 |
| |
| /* define CONFIG_SYS_MEM_TOP_HIDE 8M space for free buffer */ |
| #define CONFIG_SYS_MEM_TOP_HIDE 0x00800000 |
| |
| #define CONFIG_MULTI_DTB 1 |
| |
| /* support secure boot */ |
| #define CONFIG_AML_SECURE_UBOOT 1 |
| |
| #if defined(CONFIG_AML_SECURE_UBOOT) |
| |
| /* unify build for generate encrypted bootloader "u-boot.bin.encrypt" */ |
| #define CONFIG_AML_CRYPTO_UBOOT 1 |
| //#define CONFIG_AML_SIGNED_UBOOT 1 |
| /* unify build for generate encrypted kernel image |
| * SRC : "board/amlogic/(board)/boot.img" |
| * DST : "fip/boot.img.encrypt" |
| */ |
| /* #define CONFIG_AML_CRYPTO_IMG 1 */ |
| |
| #endif /* CONFIG_AML_SECURE_UBOOT */ |
| |
| #define CONFIG_FIP_IMG_SUPPORT 1 |
| |
| #define CONFIG_FULL_RAMDUMP 1 |
| |
| #define BL32_SHARE_MEM_SIZE 0x800000 |
| |
| #define CONFIG_AVB2_UBOOT_SHA256 |
| |
| #define CONFIG_AML_KASLR_SEED |
| |
| #endif |
| |