arch/powerpc/include/asm/fsl_ddr_sdram.h

/*
 * Copyright 2008-2011 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * Version 2 as published by the Free Software Foundation.
 */

#ifndef FSL_DDR_MEMCTL_H
#define FSL_DDR_MEMCTL_H

/*
 * Pick a basic DDR Technology.
 */
#include <ddr_spd.h>

#define SDRAM_TYPE_DDR1    2
#define SDRAM_TYPE_DDR2    3
#define SDRAM_TYPE_LPDDR1  6
#define SDRAM_TYPE_DDR3    7

#define DDR_BL4		4	/* burst length 4 */
#define DDR_BC4		DDR_BL4	/* burst chop for ddr3 */
#define DDR_OTF		6	/* on-the-fly BC4 and BL8 */
#define DDR_BL8		8	/* burst length 8 */

#define DDR3_RTT_60_OHM		1 /* RTT_Nom = RZQ/4 */
#define DDR3_RTT_120_OHM	2 /* RTT_Nom = RZQ/2 */
#define DDR3_RTT_40_OHM		3 /* RTT_Nom = RZQ/6 */
#define DDR3_RTT_20_OHM		4 /* RTT_Nom = RZQ/12 */
#define DDR3_RTT_30_OHM		5 /* RTT_Nom = RZQ/8 */

#if defined(CONFIG_FSL_DDR1)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR	(1)
typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR1
#endif
#elif defined(CONFIG_FSL_DDR2)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR	(3)
typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR2
#endif
#elif defined(CONFIG_FSL_DDR3)
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR	(3)	/* FIXME */
typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
#ifndef CONFIG_FSL_SDRAM_TYPE
#define CONFIG_FSL_SDRAM_TYPE	SDRAM_TYPE_DDR3
#endif
#endif	/* #if defined(CONFIG_FSL_DDR1) */

/* define bank(chip select) interleaving mode */
#define FSL_DDR_CS0_CS1			0x40
#define FSL_DDR_CS2_CS3			0x20
#define FSL_DDR_CS0_CS1_AND_CS2_CS3	(FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
#define FSL_DDR_CS0_CS1_CS2_CS3		(FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)

/* define memory controller interleaving mode */
#define FSL_DDR_CACHE_LINE_INTERLEAVING	0x0
#define FSL_DDR_PAGE_INTERLEAVING	0x1
#define FSL_DDR_BANK_INTERLEAVING	0x2
#define FSL_DDR_SUPERBANK_INTERLEAVING	0x3

/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
 */
#define SDRAM_CFG_MEM_EN		0x80000000
#define SDRAM_CFG_SREN			0x40000000
#define SDRAM_CFG_ECC_EN		0x20000000
#define SDRAM_CFG_RD_EN			0x10000000
#define SDRAM_CFG_SDRAM_TYPE_DDR1	0x02000000
#define SDRAM_CFG_SDRAM_TYPE_DDR2	0x03000000
#define SDRAM_CFG_SDRAM_TYPE_MASK	0x07000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
#define SDRAM_CFG_DYN_PWR		0x00200000
#define SDRAM_CFG_32_BE			0x00080000
#define SDRAM_CFG_8_BE			0x00040000
#define SDRAM_CFG_NCAP			0x00020000
#define SDRAM_CFG_2T_EN			0x00008000
#define SDRAM_CFG_BI			0x00000001

#if defined(CONFIG_P4080)
#define RD_TO_PRE_MASK		0xf
#define RD_TO_PRE_SHIFT		13
#define WR_DATA_DELAY_MASK	0xf
#define WR_DATA_DELAY_SHIFT	9
#else
#define RD_TO_PRE_MASK		0x7
#define RD_TO_PRE_SHIFT		13
#define WR_DATA_DELAY_MASK	0x7
#define WR_DATA_DELAY_SHIFT	10
#endif

/* Record of register values computed */
typedef struct fsl_ddr_cfg_regs_s {
	struct {
		unsigned int bnds;
		unsigned int config;
		unsigned int config_2;
	} cs[CONFIG_CHIP_SELECTS_PER_CTRL];
	unsigned int timing_cfg_3;
	unsigned int timing_cfg_0;
	unsigned int timing_cfg_1;
	unsigned int timing_cfg_2;
	unsigned int ddr_sdram_cfg;
	unsigned int ddr_sdram_cfg_2;
	unsigned int ddr_sdram_mode;
	unsigned int ddr_sdram_mode_2;
	unsigned int ddr_sdram_md_cntl;
	unsigned int ddr_sdram_interval;
	unsigned int ddr_data_init;
	unsigned int ddr_sdram_clk_cntl;
	unsigned int ddr_init_addr;
	unsigned int ddr_init_ext_addr;
	unsigned int timing_cfg_4;
	unsigned int timing_cfg_5;
	unsigned int ddr_zq_cntl;
	unsigned int ddr_wrlvl_cntl;
	unsigned int ddr_sr_cntr;
	unsigned int ddr_sdram_rcw_1;
	unsigned int ddr_sdram_rcw_2;
	unsigned int ddr_eor;
	unsigned int ddr_cdr1;
	unsigned int ddr_cdr2;
	unsigned int err_disable;
	unsigned int err_int_en;
	unsigned int debug[32];
} fsl_ddr_cfg_regs_t;

typedef struct memctl_options_partial_s {
	unsigned int all_DIMMs_ECC_capable;
	unsigned int all_DIMMs_tCKmax_ps;
	unsigned int all_DIMMs_burst_lengths_bitmask;
	unsigned int all_DIMMs_registered;
	unsigned int all_DIMMs_unbuffered;
	/*	unsigned int lowest_common_SPD_caslat; */
	unsigned int all_DIMMs_minimum_tRCD_ps;
} memctl_options_partial_t;

/*
 * Generalized parameters for memory controller configuration,
 * might be a little specific to the FSL memory controller
 */
typedef struct memctl_options_s {
	/*
	 * Memory organization parameters
	 *
	 * if DIMM is present in the system
	 * where DIMMs are with respect to chip select
	 * where chip selects are with respect to memory boundaries
	 */
	unsigned int registered_dimm_en;    /* use registered DIMM support */

	/* Options local to a Chip Select */
	struct cs_local_opts_s {
		unsigned int auto_precharge;
		unsigned int odt_rd_cfg;
		unsigned int odt_wr_cfg;
	} cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];

	/* Special configurations for chip select */
	unsigned int memctl_interleaving;
	unsigned int memctl_interleaving_mode;
	unsigned int ba_intlv_ctl;
	unsigned int addr_hash;

	/* Operational mode parameters */
	unsigned int ECC_mode;	 /* Use ECC? */
	/* Initialize ECC using memory controller? */
	unsigned int ECC_init_using_memctl;
	unsigned int DQS_config;	/* Use DQS? maybe only with DDR2? */
	/* SREN - self-refresh during sleep */
	unsigned int self_refresh_in_sleep;
	unsigned int dynamic_power;	/* DYN_PWR */
	/* memory data width to use (16-bit, 32-bit, 64-bit) */
	unsigned int data_bus_width;
	unsigned int burst_length;	/* BL4, OTF and BL8 */
	/* On-The-Fly Burst Chop enable */
	unsigned int OTF_burst_chop_en;
	/* mirrior DIMMs for DDR3 */
	unsigned int mirrored_dimm;
	unsigned int quad_rank_present;
	unsigned int ap_en;	/* address parity enable for RDIMM */

	/* Global Timing Parameters */
	unsigned int cas_latency_override;
	unsigned int cas_latency_override_value;
	unsigned int use_derated_caslat;
	unsigned int additive_latency_override;
	unsigned int additive_latency_override_value;

	unsigned int clk_adjust;		/* */
	unsigned int cpo_override;
	unsigned int write_data_delay;		/* DQS adjust */

	unsigned int wrlvl_override;
	unsigned int wrlvl_sample;		/* Write leveling */
	unsigned int wrlvl_start;

	unsigned int half_strength_driver_enable;
	unsigned int twoT_en;
	unsigned int threeT_en;
	unsigned int bstopre;
	unsigned int tCKE_clock_pulse_width_ps;	/* tCKE */
	unsigned int tFAW_window_four_activates_ps;	/* tFAW --  FOUR_ACT */

	/* Rtt impedance */
	unsigned int rtt_override;		/* rtt_override enable */
	unsigned int rtt_override_value;	/* that is Rtt_Nom for DDR3 */
	unsigned int rtt_wr_override_value;	/* this is Rtt_WR for DDR3 */

	/* Automatic self refresh */
	unsigned int auto_self_refresh_en;
	unsigned int sr_it;
	/* ZQ calibration */
	unsigned int zq_en;
	/* Write leveling */
	unsigned int wrlvl_en;
	/* RCW override for RDIMM */
	unsigned int rcw_override;
	unsigned int rcw_1;
	unsigned int rcw_2;
	/* control register 1 */
	unsigned int ddr_cdr1;
} memctl_options_t;

extern phys_size_t fsl_ddr_sdram(void);
extern int fsl_use_spd(void);

/*
 * The 85xx boards have a common prototype for fixed_sdram so put the
 * declaration here.
 */
#ifdef CONFIG_MPC85xx
extern phys_size_t fixed_sdram(void);
#endif

#if defined(CONFIG_DDR_ECC)
extern void ddr_enable_ecc(unsigned int dram_size);
#endif


typedef struct fixed_ddr_parm{
	int min_freq;
	int max_freq;
	fsl_ddr_cfg_regs_t *ddr_settings;
} fixed_ddr_parm_t;
#endif